IMPROVEMENT OF METHODS OF CONDUCTING ENGINEERING RECONNAISSANCE IN THE INTERESTS OF ENGINEERING SUPPORT OF COMBAT OPERATIONS OF TROOPS (FORCES)

Authors

  • Y. Ftemov Hetman Petro Sahaidachny National Army Academy Author
  • O. Kuprinenko Hetman Petro Sahaidachny National Army Academy Author
  • S.V. Lienkov Military Institute of Taras Shevchenko National University of Kyiv Author
  • O.V. Miroshnichenko Military Institute of Taras Shevchenko National University of Kyiv Author
  • N.I. Litvinenko Military Institute of Taras Shevchenko National University of Kyiv Author

DOI:

https://doi.org/10.17721/2519-481X/2023/80-08

Keywords:

engineering support, engineering intelligence, methods, engineering measures, unmanned aerial vehicles

Abstract

The experience of the Russian-Ukrainian war shows that with the rather large spatial and temporal indicators of combat operations, the volume of one of the main measures of engineering support - engineering reconnaissance - increases, which in turn leads to an excess of the required time and the need to attract a significant amount of resources for its implementation. To resolve this discrepancy, it is necessary to envisage not only the strengthening of forces and means and their rational distribution, but also the choice of the most effective ways to accomplish the tasks. Neglect of engineering support tasks (measures) always leads to unjustified losses in personnel, weapons and military equipment. The purpose of the study is to find new, more advanced ways of conducting engineering reconnaissance, to reveal the role, risks, advantages and disadvantages, and to analyze the possibility of their integration into the practice of engineering troops. The main task was to determine the effectiveness of methods of performing engineering intelligence tasks, the composition of equipment of engineering intelligence bodies, taking into account the capabilities of modern technical means. The tasks of engineering reconnaissance in the main types of combat (operations) and at different levels, which involve units of engineering troops, are analyzed. It is established that the proposed methods of conducting engineering reconnaissance will lead to a sharp change in the conditions of its conduct and reduce the time for the implementation of reconnaissance activities by engineering units at individual sites. The role, place and influence of unmanned aerial vehicles of various types used by the defense forces in the course of combat missions are studied and it is established that the most effective methods, both in the course of defensive and offensive combat (operation), are combined air-ground. The implementation of the proposed methods of engineering intelligence contributes to the improvement of such key indicators as efficiency and reliability. command and control bodies and troops (forces) compared to traditional approaches. The main direction of further research should be directed to the development of various methods of conducting engineering reconnaissance, taking into account trends in the direction of robotization of processes to improve the capabilities of mine action.

Author Biographies

References

1. Ftemov Y. (2020). Recommendations for covering the interpositional space, taking into account measures for early preparation of the territory for defense. Weapon systems and military equipment, 4 (64). p.43-48. https://doi.org/10.30748/soivt.2020.64.05. [in Ukrainian].

2. Organization of the execution of tasks by parts and units of engineering troops of the Armed Forcesof Ukraine. Part I. Fundamentals of engineering support. Engineering exploration : education manual / Milyutin V.A. etc. Lviv : NASV of the Armed Forces of Ukraine, 2014. 142 p. [in Ukrainian].

3. Ftemov Y.(2021). Justification of the set of technical means for engineering reconnaissance of troops (forces). Weapon systems and military equipment, 3 (67). p. 45-51. https://doi.org/10.30748/soivt.2021.67.06. [in Ukrainian].

4. Lupandin V., Megelbey G., Matsko O., Kurtseitov T., Mironenko P. (2019). The main trends of thedevelopment and application of a unmanned aerial vehicle groups. Science and technology of the Air Force of the Armed Forces of Ukraine, № 2 (35). p. 88-96. https://doi.org/10.30748/nitps.2019.35.11. [in Ukrainian].

5. Combat engineering support in modern operations: education manual / Neshchadin O.V. etc. Lviv :NASV of the Armed Forces of Ukraine, 2017. 320 p. [in Ukrainian].

6. Panov V., Sytnik O. (2013). Methodical approach to the evaluation of the system of extraction andprocessing of intelligence information on engineering environment. Collection of scientific works of the National Academy of the State Border Service of Ukraine, № 2 (60). p. 164-169. http://nbuv.gov.ua/UJRN/znpnapv_vtn_2013_2_19. [in Ukrainian].

7. Konotopets M., Cherevko R. (2018) Analiz funktsionuvannya systemy upravlinnya polem boyuinzhenernoho zabezpechennya operatsiyi, problemy ta shlyakhy yoho vyrishennya [Analysis of the functioning of battlefield control system of engineering support of an operation, problems and ways of its solution]. Social development & Security, 1 (3), p. 37-44. DOI: http://doi.org/10.5281/zenodo.1183896 [in Ukrainian].

8. Myronchuk, Y., & Overchuk, S. (2019). Methodologyof the preparation and planning the aerialreconnaissance of the operational-tactical depth with using the unmanned aircraft. Military Technical Collection, 21, p. 44-52. https://doi.org/10.33577/2312-4458.21.2019.44-52. [in Ukrainian].

9. Kotsyuruba V., Tsybulia S., Rybalko V. (2019). Obgruntuvannya dotsilʹnosti vykorystannyasposobu povitryanoyi rozvidky rayoniv intensyvnoho zastosuvannya minnoyi zbroyi [Justification of the using of the method of air reconnaissance of area of intensive application of mine weapons]. Social development & Security, 9 (1), 60–68.DOI: http://doi.org/10.33445/sds.2019.9.1.5. [in Ukrainian].

10. Maistrenko О., Burdeinyi М., Stehura, S., Stetsiv, S. (2020). Determination of coordinates ofterrestrial targets with the use of small UAVs on the basis of an improvedpseudolongdimensional method. Military Technical Collection, 22. p. 43-47. https://doi.org/10.33577/2312-4458.22.2020.43-47. [in Ukrainian].

11. Kucherenko Y., Naumenko M., Kuznetsova M. (2018). Analysis experience use unbeatural vehicleapparatus and determination their further development during conduct netset central operations. Weapon systems and military equipment, 1 (53). p. 25-30. https://doi.org/10.30748/soivt.2018.53.03. [in Ukrainian].

12. Pavlenko M., Tykhonov Y., Nykyforov Y. (2021). Recommendations for the efficient use ofunmanned aerial vehicles in Joint Forces Operation. Science and technology of the Air Force of the Armed Forces of Ukraine, 1 (42). p. 131-36. https://doi.org/10.30748/nitps.2021.42.17. [in Ukrainian].

13. Ivashchuk B., Pavlusha Y., Ivashchuk L. (2021). Research possibilities of tactical class air intelligence of unmanned aerial vehicles. Weapon systems and military equipment, 2 (66). p. 17-22. https://doi.org/10.30748/soivt.2021.66.02. [in Ukrainian].

14. Oleksenko O., Avramenko О., Fedorov A., Snitsarenko V., Chernavina O. (2022). Use ofunmanned aerial vehicles by the armed forces of the Russian Federation in the war against Ukraine. Science and technology of the Air Force of the Armed Forces of Ukraine, 4 (49). p. 37-42. https://doi.org/10.30748/nitps.2022.49.05. [in Ukrainian].

15. Neroba V. (2019). The role of mine weapons in modern wars and border conflicts. Collection ofscientific works of the National Academy of the State Border Service of Ukraine, 81 (3). p. 155-171. https://doi.org/10.32453/3.v81i3.444. [in Ukrainian].

Published

2024-05-09

Issue

Section

MILITARY EQUIPMENT AND TWO-DESTINATION TECHNOLOGIES